Free 2013 Mercedes-Benz Sprinter VIN Decoder

Reveal the elegance and advanced features of your 2013 Mercedes-Benz Sprinter. Use our free VIN decoder below to uncover its history and unique characteristics. Enter your VIN now!

Over 1 Million reports ran on
Bumper.com

Approved NMVTIS Data Provider

Approved NMVTIS Data Provider

Reference to these media organizations does not constitute or imply endorsement of Bumper or its products and services.

How to decode a 2013 Mercedes-Benz Sprinter VIN

Characters 1-3 of a 2013 Mercedes-Benz Sprinter VIN

A World Manufacturer Identifier (WMI) is a unique three-letter code assigned to car manufacturers to signify the company, the type of vehicle they produce, and the country of origin. For the 2013 Mercedes-Benz Sprinter, its WMI codes “WD3” and “WD4” distinguish the vehicle’s origin and type. “WD3” is designated for Sprinter trucks, highlighting its utility focus, while “WD4” refers to Sprinters classified as Multipurpose Passenger Vehicles, emphasizing passenger transport. Both codes confirm that these vehicles were manufactured by Mercedes-Benz AG, based in Stuttgart, Baden-Wuerttemberg, Germany, specifying a production span from 2010 to 2019 for the 2013 models. This system provides an essential tool for identification, allowing for quick access to crucial vehicle information.

List of WMI Codes for a 2013 Mercedes-Benz Sprinter

WMI: WD3

  • Model Years Covered: 2010-2019
  • Example VIN: WD3PE8CC0D5727758
  • Manufacturer Name: Mercedes-Benz, AG
  • Vehicle Type: Truck
  • City: Stuttgart
  • State or Province: Baden-Wuerttemberg
  • Country: Germany

WMI: WD4

  • Model Years Covered: 2010-2019
  • Example VIN: WD4PE7CC1D5788249
  • Manufacturer Name: Mercedes-Benz, AG
  • Vehicle Type: Multipurpose Passenger Vehicle (MPV)
  • City: Stuttgart
  • State or Province: Baden-Wuerttemberg
  • Country: Germany

Characters 4-8 are the Vehicle Descriptor Section (VDS) of a 2013 Mercedes-Benz Sprinter VIN

These characters correspond to components like:

  • Engine type
  • Transmission
  • Model or trim
  • Body style
  • Gross vehicle weight range

Below find the known vehicle descriptor codes for a 2013 Mercedes-Benz Sprinter:

Known VDS for a 2013 Mercedes-Benz Sprinter
PE8CCPE7CCPF1CCPE8CBPE7CDPF3CCPF4CCPF4CDBE7CCPE7CB
PF0CCPF1CDPE8CDBF1CC

Auto manufacturers have some discretion to decide how they want to code this section, but its contents and decoded results are generally consistent.

Character 9 is the “check digit” in a 2013 Mercedes-Benz Sprinter VIN.

Based on a formula developed by the US Department of Transportation, it helps reduce fraud by ensuring the validity of the VIN.

10th Character in the 2013 Mercedes-Benz Sprinter VIN — Year Code

Year Code Year
D 2013

11th Character in the 2013 Mercedes-Benz Sprinter VIN — Plant Code(s)

Known 2013 Mercedes-Benz Sprinter Assembly Factory VIN Code(s)

Plant Code Plant City Plant State Plant Country Plant Company Name Example VIN
5 Dusseldorf Germany WD3PE8CC0D5727758

VIN Characters 12 - 17 of a 2013 Mercedes-Benz Sprinter

The final 6 characters in a 2013 Mercedes-Benz Sprinter’s 17-digit VIN are its serial number, which will be unique to every vehicle.

Want to unlock even more detailed info about your vehicle?

How to find a 2013 Mercedes-Benz Sprinter’s VIN?

Locating the VIN number on your 2013 Mercedes-Benz Sprinter is key for identification. Here’s how to find it:

  1. Look at the lower corner of the dashboard on the driver’s side of your Mercedes-Benz Sprinter. The VIN is usually visible through the windshield.
  2. Open the door on the driver’s side and check the doorpost (where the door latches when it is closed). It’s common to find a VIN sticker in this location on your Sprinter.
  3. Examine the area around the radiator. Sometimes the VIN is stamped on a plate located near the radiator of the vehicle.
  4. Inspect the engine block, where the VIN might also be stamped onto the metal surface. In some Sprinter models, this is a possible location to find the VIN.
  5. Look at your vehicle’s registration documents or the insurance card. The VIN for your Mercedes-Benz Sprinter will be printed on these documents.
VIN Decoder

What info can a 2013 Mercedes-Benz Sprinter VIN reveal?

  • Model Year and Make: The VIN can reveal the vehicle’s model year, such as the year 2013, and the manufacturer, possibly being a Sprinter, offering insights into the age and potential market value of the vehicle.
  • Body Class and Type: A VIN can specify the body class, such as a Cargo Van for the 2013 Sprinter, possibly indicating its intended use and body design.
  • Engine and Fuel Type: The VIN can provide details about the engine model, for example, MG5+MH1, and the primary fuel type, possibly Diesel, which can offer insights into the vehicle’s power source specifics and fuel efficiency.
  • Safety Features: Decoding the VIN may indicate the inclusion of standard safety features like Anti-lock Braking System (ABS), Electronic Stability Control (ESC), and Crash Imminent Braking (CIB), highlighting the vehicle’s equipped safety technologies.
  • Airbag Locations: The VIN may reveal the presence of front airbags for the driver only and side airbags for the 1st-row occupants, potentially highlighting the vehicle’s safety restraint system.
  • Plant Information: The VIN could reveal the manufacturing location, which in the case of the 2013 Sprinter being Dusseldorf, Germany, can provide insight into its origin and potentially the quality and standards of manufacturing.
  • Gross Vehicle Weight Rating: The classification under Class 2G, indicating a weight range from 8,001 to 9,000 lb (3,629 - 4,082 kg), can provide valuable information on the vehicle’s capacity and size category.
VIN Decoder

Don’t have your 2013 Mercedes-Benz Sprinter’s VIN handy? Try our license plate lookup instead!

Sample VIN Decode Report for a 2013 Mercedes-Benz Sprinter

Vehicle Spec Value
Anti-lock Braking System (ABS) Standard
Body Class Cargo Van
Brake System Type Hydraulic
Crash Imminent Braking (CIB) Standard
Electronic Stability Control (ESC) Standard
Engine Model MG5+MH1
Front Air Bag Locations Driver Seat Only
Fuel Type - Primary Diesel
Gross Vehicle Weight Rating From Class 2G: 8,001 - 9,000 lb (3,629 - 4,082 kg)
Model Sprinter
Model Year 2013
Other Restraint System Info Inflatable front protection systems for driver as well as inflatable side protection systems(1st row) and type 2 seat belts for all occupants. Seat belts on all outboard designated seating positions are equipped with load limiters and pretensioners
Plant City Dusseldorf
Plant Company Name
Plant Country Germany
Pretensioner Yes
Seat Belt Type Manual
Series 2500
Side Air Bag Locations 1st Row (Driver and Passenger)
Tire Pressure Monitoring System (TPMS) Type Direct
Trim Standard / High
Vehicle Descriptor WD3PE7CB*D5
Vehicle Type Truck
Wheel Base (inches) To 144
Sample_VIN WD3PE7CBXD5772045

Decode other Sprinter Years

Ready, Set, Bumper...

Try Bumper today and learn more about a vehicle you plan to buy or already own.

TRY Bumper Today
Race flag